STRIKER HT COMBAT PANTS COYOTE
Keep cool when it gets hot - se film
The Striker HT air circulation system
· Pocket configuration:
o 2X Front pockets
o 2X Back pockets
o 2X Safety pockets
o 2X Multi-functional, two- way access side pocket with inner compartments
o 2X Attached gear pocket with a security strap
o 2X Mag/ knife/ marker pocket
o 2X Large lower leg pockets
· Double belt loops
· Stretch in the waistband
· Ergonomic UF PRO® 3-layer knee protection system
· Width-adjustable lower leg area with a vertical zipper and elastic cord at the leg ends
· Double zipper pull fly
· Inner zipper for detachable WINDSTOPPER® lining
· CORDURA® reinforced instep
· Boot loop
· Loops for suspenders
THE UF PRO® 3-LAYER KNEE PROTECTION SYSTEM.
The Striker HT combat pants can be upgraded with two different knee pads*.
The UF PRO® Flex- Pads offer reliable and comfortable protection against impacts and additional cushioning while kneeling.
The UF PRO® Solid- Pads offer protection against penetration of sharp objects.
Both layers are protected with a CORDURA® face fabric which provides extreme abrasion resistance.
*Please note that the pads need to be purchased separately.
UF PRO® HYBRID/DESIGN.
Three different fabric technologies are used in the Striker HT Pants
The breathable and durable Schoeller®-dynamic stretch material makes sure the pants follow all your moves
· For durability and abrasion resistance the knee and instep area are reinforced with CORDURA® fabric
· A lightweight Polyester/Cotton or Nylon/Cotton fabric for the camouflage versions offers excellent breathability
and wear comfort
The Striker HT Combat Pants are equipped with a total of 14 pockets.
The big side pockets provide horizontal and vertical access to the main cargo area and inner compartments. The attached gear pocket can be easily secured with a quiet, plastic reinforced tab.
The small gear pocket in the upper thigh area provides storage for smaller items like a knife, light, or a spare magazine.
The spacious lower leg pocket can be tightened with a draw cord and vertical zipper.
UF PRO leverer klær tiltenkt profesjonelle brukere som stiller høye krav til detaljer og materialvalg samt funksjonalitet.
Høykvalitets feltbukser, aksjonsbukser, softshelljakker, combatshirt osv laget for dynamisk bruk.
UNI&FORMA was founded in 1997 with the vision to make high performance garment systems for demanding professionals.
Under the brand name UF PRO®, the garments are today worn by various military and law enforcement special forces, where they are appreciated for its excellent wear comfort, quality and reliability.
In order to provide a completely satisfying experience with our UF PRO® garments at all times, the uncompromising product quality, a fair price, as well as sustainability and social fairness have the utmost priority for us. In order to achieve this, we count on strategic partnerships with technology leaders like W.L. Gore, Carinthia, Schoeller and others. But most importantly we develop our own UF PRO® garment technologies, which provide innovative solutions for the requirements of demanding professionals.
Find out more about our UF PRO® Innovations:
Our philosophy is that all UF PRO® products provide unique performance qualities to the wearer. Given that technologies and requirements are always in flux, we accept and embrace the challenges this presents.
In order to permanently improve our products we have adopted four key product development principles:
Garments are the interface between the wearer and the environment in which they are worn. Cut, materials, workmanship and even colours can make a huge difference. They decide whether a garment supports and protects, or hinder and harm the individual, who is wearing them. Naturally, the requirements vary as much as the specific work environment and the wearer's tasks vary.
We strongly believe that only if we thoroughly understand the environment in which our products are worn, and the job our customers have to fulfil, only then can we create excellent products.
A key component of our product development is therefore the dialogue with expert end users that help us to understand their professional environment and define their expectations regarding:
• Work specific functional requirements like pockets, hooks, loops and other functional features
• Required protection against weather, objects, flame/heat and other for the professional environmental typical threats
• Thermo-physiological impact of the specific work environment, e.g. extreme high/low temperatures, humidity
• Typical sensory requirements like tactility, hearing, and maybe even smell
• Ergonomic requirements
Whenever a new generation of products is developed, it has to pass an intensive test phase, in which expert end users check the field performance of the product. Either this testing is done by our test team or specifically assigned end user teams.
Textiles are commonly considered to be low tech. There is a tendency of people to overestimate their textile expertise only because they have been buying their own clothes for the last decades. But the information we might receive from sales personnel in boutiques is usually extremely flat or even completely wrong. Stereotypes like, "cotton is natural" and "synthetic fibres contain a lot of chemistry" may prove to be to be irrelevant in today's high tech textile world. Only in-depth knowledge of materials, technologies, and processes can lead to good judgement and the right manufacturing decision.
AT UNI&FORMA we apply the state of the art technologies in order to make the best products. Therefore we have established partnerships with experts in the industry that provide us with the in-depth knowledge and the information that we require in order to make the right decision when it comes to choose the best technologies for our products.
One of the phenomenons we encounter in our industry is that a lot of products are either functional or great looking. We believe that not only functionality, protection and thermo-physiological comfort are important for great professional wear, but that the look and design are key elements which define the quality of a product.
The most visible and high impact impression a corporation can make is through its employees. Their behaviour and their appearance represent the organization they are working for. Therefore our products are designed to be in tune with the image of the individual customer's organization.
We invest a lot of time and energy into the design and look of our garments, because when clothes look and feel good they also make you feel better. As we all spend approximately one third of our time working, we want people to look and feel good while they do their job.
Find out more about our corporate identity wear.
We at UNI&FORMA take our obligation to our environment, our children and the global community seriously. Even though we are a relatively small company with a small environmental footprint, we are dedicated to a sustainable and social behaviour.
Our raw materials and processes are constantly monitored and optimized to leave the smallest possible ecological footprint. We avoid long transport by selecting raw materials and finished goods mainly from European manufacturing sources. We manufacture our own products in Europe and do not allow child labour at any of our manufacturing partners locations.
4 pakning med belt keeper nylon To trykknapper 100% nylon
US Assault Pack Large - sort Rimelig og god allround sekk. Nå med laser cut MOLLE...
MEDIC Patch - velcro Høykvalitets patc, cordura, velcro bakside. 5 x 15 cm Ve...
Outdoor Research Aerator hanske - coyote Vented, Cooling Tactility SE FILM OM PRODUKT...
UF PRO® Flex Soft Elbow Pads The UF PRO® Flex - Soft pads are made for activit...
UF PRO® STRIKER XT GEN.2 COMBAT SHIRT - BROWN GREY The Striker XT Combat Shirt is ...